Skip to content
Drinking water you can trust, from the Chattahoochee to your glass (404) 882-1575
Orange rust stains streaking down a wall

Iron & Sulfur Removal

Iron & Sulfur Removal in Sandy Springs

Oxidizing filtration for wells in Milton, north Alpharetta and nearby rural properties.

Iron is common in Georgia wells

Iron and sulfur removal near Sandy Springs is one of our most common well jobs. Georgia's soils are rich in iron, and well water often carries it. It arrives clear and turns orange when it meets air, staining sinks, toilets and laundry.

Manganese leaves dark specks. Hydrogen sulfide makes water smell like rotten eggs.

The fix is to oxidize these into particles and trap them in a media bed that backwashes itself clean. We test iron, manganese, sulfur and pH first, because all four decide the method.

If the smell is only in hot water, the water heater's anode rod may be the cause. We check that first.

We also explain how to care for the system between visits, including what a normal backwash sounds like and what to do if staining returns.

What is included

Built from your numbers.

  • Four-number test

    Iron, manganese, sulfur and pH.

  • Oxidation stage

    Air injection or stronger oxidizer.

  • Backwashing tank

    Self-cleaning media bed.

  • Sediment pre-filter

    Protects the system.

  • pH correction

    When water is acidic.

  • Anode check

    For hot-water-only odor.

  • Backwash timing

    Set for quiet hours.

  • Before-and-after iron

    Proof it worked.

How it runs

  1. Test

    On site, with lab confirmation if needed.

  2. Install

    Three to five hours.

  3. Tune

    Iron rechecked; backwash adjusted.

Good to know

Is iron in water harmful?
It is mainly an aesthetic problem: staining, taste and clogging.
Why does only my hot water smell?
Often a reaction in the water heater, fixable with a different anode.
Can levels change?
Yes, after drought or heavy rain. Annual tests catch it.
Does the system use chemicals?
Many use only air to oxidize the iron. Heavier sulfur or manganese may call for a stronger oxidizer, which we explain before installing.
How often does it backwash?
Typically every few days, set for quiet overnight hours and tuned during the first weeks.

Signs your well needs iron treatment

Orange or rust-colored stains in sinks, tubs and toilets are the clearest sign. Others include laundry that comes out dingy or stained, a metallic taste, reddish sediment in a glass left standing, and clogged aerators or showerheads. Black or brown specks usually point to manganese.

A rotten-egg smell can come from the well or from the water heater. If it is in both hot and cold water, the well is likely the source. If it is only in hot water, the heater is the likely cause. We test properly before recommending anything, because the right fix depends on which one it is. Getting that diagnosis right is what keeps the cost sensible.

Why us for iron and sulfur

  • All four numbers

    Skipping pH or manganese causes failures.

  • Simple fix first

    Anode before filter.

  • Tuned to your well

    Clean bed, minimal water use.

  • Tested before we recommend
  • NSF/ANSI-certified equipment
  • One written price
  • Two-hour arrival windows

Done scrubbing orange stains?

Book a well test. We will measure and fix the cause.